Alkalinity Up raises the alkalinity of the spa water. Helps prevent rapid pH fluctuation. A properly maintained spa should have approx 100-150 ppm.

1 1/4 tbs per 250gal increases by 10ppm

Brom-Tabs are slow dissolving bromine tablets that must be used in bromine feeders to maintain a chlorine free bromine spa. They are highly effective and have no harsh chlorine smell.

This product is a blend of cleaning agents and degreasers especially formulated to penetrate deeply into any reusable cartridge filter or DE element and remove the accumulated materials such as body oil, grease, dirt, and soap scum. By so doing, the cartridge is thoroughly cleaned and "renued", allowing it to be used again. Clean the filter cartridge every few weeks or at least every time you change the water, depending upon the bathing load.

Control eliminates water discoloration caused by mineral and scale deposits in spa water. Also helps your filter remove suspended particles that cause cloudiness. Does the work of two products.

1oz per 500gal

A two part spa care kit that includes all the essentials to start up your spa and keep the water looking great.

pH Hold helps to manitain proper pH balance on your spa water. A single addition of pH Hold, when the spa is filed, will help maintain pH until spa is drained and refilled. Not for use on plaster spas.

1qt per 300-500gal

Hardness Control raises the hardness level of spa water. Helps prevent break down of equipment or damage to spa surfaces if water is either too soft or acidic. Calcium hardness should be 175-225 ppm

1oz per 500gal increases by 10ppm

Majestic Blue is a superior 4-in-1 clarifier for swimming pools, spas, fountains, water-parks, aquariums etc. It Clarifies water. removes metals, eliminates oil and scum lines, and improves filter efficiency.

1oz per 5000gal

Sani-Brom is a liquid bromine salt that is used in with Sani-Start to create a non-chlorine based sanitizing system. Sani-Brom is compatible with most chemicals normally used to treat spa and hot tub water such as sanitizers, acids, bases, and algicides.

2oz per 500 gal

Sani-Start is the second part os a two part bromine chlorinating system. When used with Sani Brom it is an effective disinfectant treatment for spas and hot tubs.

4oz per 500gal

Spa Surface Cleaner is safe for all spa surfaces. It is meant to clean and polish most surfaces found in and around spas. It does not contain harsh acids and has been specially formulated to remove body oils, grease, and dirt that form the "bathtub ring" on spa walls.